Fresh air intake kit - KDDP55D160-2
1
READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.
KEEP THIS MANUAL IN A HANDY PLACE FOR FUTURE REFERENCE.
Caution
Before starting the installation work, carefully read the following safety precautions and observe them to ensure safety during work.
●
Make sure to use the attached or speci
fi
ed components to install the products. Otherwise, it may cause air leak or the product may fall.
●
After installation, check whether there is no abnormality during the trial operation.
Combination table
Kit name
Applicable indoor unit name and panel name
Model
KDDP55D160-2
SPLIT
FCAG-B, FCAHG-H, FXFQ-B
Decoration panel
BYCQ140-E
Remarks
●
This kit can be installed on the ceiling mounted cassette type air conditioner.
●
Before installation, con
fi
rm the indoor unit name with reference to the table above.
●
Please refer to the installation manual for the indoor unit as well as the mounting procedure for the decoration panel during the installation.
●
When mounting a duct fan, make sure to use a wiring adaptor (EKRP1C12) and link it with the indoor unit fan.
CAUTION
Control the intake air
fl
ow volume of the indoor unit so it is less than 10% slower.
●
Be sure to install the attached sensor assembly.
The recommended duct for on-site connection is shown in the table below.
Part name
Part number
Flexible duct
(Normal diameter D150)
K-FDS151D (1m) K-FDS153D (3m)
K-FDS152D (2m) K-FDS154D (4m)
Components
Check if the following parts are included with your kit. (Shaded part is separately packed.)
Name
Suction chamber
Connecting chamber
(Left)
Connection chamber
(Right)
Sealing material
Desiccant tape
Shape
A - B
Quantity
1
1
1
2
2
Name
Screw
Sensor assembly
Clamp
Screw (for sensor)
Installation manual
(This manual)
Shape
Quantity
4
1
2
1
1
1. Selection of location and access door
(1) Refer to the following
fi
gure to select the mounting position (unit: mm).
*1
455 mm (Ceiling opening space)
Indoor unit
Inspection hatch
Duct (field supply)
