![background image](http://html1.mh-extra.com/html/daikin/fxaq-m-series/fxaq-m-series_engineering-data_2459642023.webp)
Installation
EDUS39-600-F6
22
FXAQ-M
accordance with the relevant local and national regulations.
2. BEFORE INSTALLATION
•
When moving the unit while removing it from the packing case, be sure to lift it by the four hanger brackets.
Avoid putting any pressure on other parts, especially, horizontal flaps, the refrigerant piping, drain piping, and
other resin parts.
•
Be sure to remove a cushion (corrugated paper) located between the heat exchanger and the right air filter.
•
Be sure to check the type of R-410A refrigerant to be used before installing the unit. (Using an incorrect refrigerant
will prevent normal operation of the unit.
•
The accessories needed for installation must be retained in your custody until the installation work is completed. Do
not discard them!
•
Decide upon a line of transport.
•
Leave the unit inside its packaging while until reaching the installation site. Where unpacking is unavoidable, use a
sling of soft material or protective plates together with a rope when lifting, to avoid damage or scratches to the unit.
•
For the installation of an outdoor unit, refer to the installation manual attached to the outdoor unit.
•
When using the wireless remote controller, refer to the installation manual attached to the wireless remote controller.
NOTE
•
Be sure to read this manual before installing the indoor unit.
•
Do not install or operate the unit in rooms with the following conditions:
•
Laden with mineral oil, or filled with oil vapor or spray like in kitchens. (Plastic parts may deteriorate
which could eventually cause the unit to fall out of place, or could lead to leaks.)
•
Where corrosive gas like sulfurous gas exists. Copper tubing and brazed spots may corrode which could
eventually lead to refrigerant leaks.
•
Where machines can generate electromagnetic waves. (Control system may malfunction.)
•
Where the air contains high levels of salt such as that near the ocean and where voltage fluctuates greatly
such as that in factories.
Also in vehicles or vessels.
•
This unit, both indoor and outdoor, is suitable for installation in a commercial and light industrial environment.
If installed as a household appliance it could cause electromagnetic interference.
WARNING
•
Entrust installation to the place of purchase or an authorized service man. Improper installation could lead to leaks
and, in worse cases, electric shock of fire.
•
Use of unspecified parts could lead to the unit falling, leaks and, in worse cases, electric shock or fire.
•
Summary of Contents for FXAQ-M Series
