![background image](http://html1.mh-extra.com/html/daikin/fxaq-m-series/fxaq-m-series_engineering-data_2459642022.webp)
EDUS39-600-F6
Installation
FXAQ-M
21
Improper installation may result in water leakage, electric shocks or fire.
•
Be sure to use only the specified accessories and parts for installation work.
Failure to use the specified parts may result in water leakage, electric shocks, fire or the unit falling.
•
Install the air conditioner on a foundation strong enough to withstand the weight of the unit.
A foundation of insufficient strength may result in the equipment falling and causing injuries.
•
Carry out the specified installation work after taking account of strong winds, typhoons or earthquakes.
Improper installation work may result in the equipment falling and causing accidents.
•
Make sure that a separate power supply circuit is provided for this unit and that all electrical work is carried
out by an authorized personnel according to local laws and regulations and this installation manual.
An insufficient power supply capacity or improper electrical construction may lead to electric shocks or fire.
•
Make sure that all wiring is secured, the specified wires are used, and no external forces act on the terminal
connections or wires.
Improper connections or installation may result in fire.
•
When wiring the power supply and connecting the remote controller wiring and transmission wiring, position
the wires so that the electric parts box lid can be securely fastened.
Improper positioning of the electric parts box lid may result in electric shocks, fire or the terminals overheating.
CAUTION
•
Before touching electrical parts, turn off the unit.
•
Do not touch the switch with wet fingers.
Touching a switch with wet fingers can cause electric shock.
•
Be sure to install a ground leakage breaker.
Failure to install a ground leakage breaker may result in electric shocks, or fire.
•
Do not install the air conditioner in the following locations:
(a) Where a mineral oil mist or an oil spray or vapor is produced, for example in a kitchen. Plastic parts may
deteriorate and fall off or result in water leakage.
(b) Where corrosive gas, such as sulfurous acid gas, is produced. Corroding copper pipes or soldered parts may
result in refrigerant leakage.
(c) Near machinery emitting electromagnetic waves. Electromagnetic waves may disturb the operation of the control
system and result in a malfunction of the equipment.
(d) Where flammable gases may leak, where there are carbon fiber or ignitable dust suspensions in the air, or where
volatile liquids such as thinner or gasoline are handled.
Operating the unit in such conditions may result in fire.
•
Heat exchanger fins are sharp enough to cut.
To avoid injury, wear gloves or cover the fins when working around them.
•
Refrigerant pipes may be very hot or very cold during or immediately after operation.
Touching them could result in burns or frostbite. To avoid injury give the pipes time to return to normal temperature or,
if you must touch them, be sure to wear proper gloves.
•
While following the instructions in this installation manual, insulate piping in order to prevent condensation.
Improper piping insulation may result in water leakage and property damage.
•
Be very careful about product transportation.
Some products use PP bands for packaging. Do not use any PP bands for a means of transportation. It is dangerous.
•
Do not turn off the power immediately after stopping operation.
Always wait at least five minutes before turning off the power. Otherwise, water leakage or other problems may occur.
•
Make sure to provide for adequate measures in order to prevent that the outdoor unit be used as a shelter by
small animals.
Small animals making contact with electrical parts can cause malfunctions, smoke or fire. Please instruct the
customer to keep the area around the unit clean.
NOTE
•
Install the indoor and outdoor units, power supply wiring, and connecting wires at least 3.5 ft. away from
televisions or radios in order to prevent image interference or noise.
Depending on the radio waves, a distance of 3.5 ft. may not be sufficient to eliminate noise.
•
Remote controller (wireless kit) transmitting distance is shorter than expected in rooms with electronic
fluorescent lamps
Install the indoor unit as far away from fluorescent lamps as possible.
•
Dismantling of the unit, and treatment of refrigerant, oil, and other parts, should be performed in
Summary of Contents for FXAQ-M Series
