3 About the box
Installation and operation manual
6
FWF02~05D
Fan coil units
3P443944-9T – 2023.01
WARNING
▪ Do NOT use locally purchased electrical parts inside
the product.
▪ Do NOT branch the power supply for the drain pump,
etc. from the terminal block. This could result in
electrical shock or fire.
WARNING
Keep the interconnection wiring away from copper pipes
without thermal insulation as such pipes will be very hot.
CAUTION
For walls containing a metal frame or a metal board, use a
wall embedded pipe and wall cover in the feed-through
hole to prevent possible heat, electrical shock, or fire.
NOTICE
▪ Protect pipework from physical damage.
▪ Keep the pipework installation to a minimum.
For the installer
3
About the box
Keep the following in mind:
▪ At delivery, the unit MUST be checked for damage and
completeness. Any damage or missing parts MUST be reported
immediately to the claims agent of the carrier.
▪ Bring the packed unit as close as possible to its final installation
position to prevent damage during transport.
▪ Prepare in advance the path along which you want to bring the
unit to its final installation position.
3.1
To unpack and handle the fan coil
unit
Use a sling of soft material or protective plates together with a rope
when lifting the unit. This to avoid damage or scratches to the unit.
1
Lift the unit by holding onto the hanger brackets without
exerting any pressure on other parts, especially on drain piping
and thermal insulation.
NOTICE
Do NOT lift the unit by the valve actuators (a).
a
3.2
To remove the accessories from
the fan coil unit
1x
1x
8x
4x
d
j
c
b
a
1x
4x
1x
f
g
1x
h
i
e
a
Metal clamp
b
Drain hose
c
Washer for hanger bracket
d
Screw
e
Gasket
f
Large sealing pad for drain hose
g
Installation and operation manual
h
Thermal insulation for air purge
i
Thermal insulation for valves (2 pipe: 1x and 4 pipe: 2x)
(*)
j
Tie wrap for valve thermal insulation (2 pipe: 2x and 4
pipe: 4x) (*)
*
Only models with factory mounted valve
