![background image](http://html1.mh-extra.com/html/daikin/fvq71bv/fvq71bv_installation-manual_4703920013.webp)
English
11
4. Connect the remote controller
wiring (field supplied) to the
remote controller terminal board
and lead the wiring out of the unit
as shown below.
•
Lock the remote controller wiring to the
piping guide.
5. Open the remote controller and attach the remote controller wiring (field supplied).
(Remote controller wiring has no polarity)
1. Remove the upper part of the remote
controller.
Remove the upper part of the remote
controller with
screw drivers, etc.
2. Attach the remote controller wiring.
3. Reassemble the remote controller in
the opposite order of 1. and at last,
install the attached remote controller
lid (7).
6. After the remote controller wiring, reassemble the indoor unit referring to procedures
1. ~ 4.
Terminal box lid
Remote controller
terminal board
Remote controller wiring
Upper part of
remote controller
Remote controller wiring
Remote
controller
PC board
Upper part of
remote controller
Insert the latch on
the bottom first.
Remote controller
lid (7) (attached)
Upper part of
remote controller
01_EN_3PA60136-8Y.fm Page 11 Saturday, December 22, 2007 1:04 PM