background image

9

English

AUTO Operation

After pressing the AUTO button, the air conditioner will operate according to room conditions in an automatic mode.

1. Press “

”. 

The color of the multi-colored indicator changes according to the actual operations.

When the AUTO button is pressed, the color according to the operation selected 
by the air conditioner will light up.

To change the airflow direction and airflow rate 

(page 10.)

To stop operation

2. Press “

”.

The multi-colored indicator of the unit will go off.

To change the temperature setting

NOTE

MOISTURIZING Operation

This mode moisturizes your skin.

1. Press “

” during operation.

The airflow rate and airflow direction settings are changed to auto and COMFORT 
AIRFLOW MODE respectively.

In MOISTURIZING operation, COOLING BREEZE mode cannot be selected.

To change the temperature setting

The same changes as COOLING and HEATING are possible. (page 7, 8.)

Humidity and airflow rate cannot be changed.

To change the airflow direction 

(page 10.)

The recommended airflow direction is COMFORT AIRFLOW MODE, but it can be 
changed.

To cancel the MOISTURIZING operation

2. Press “

” again.

The operation mode goes back to the previous one. The multi-colored indicator on 
the unit also goes back to the previous color.

The MOISTURE lamp on the unit will go off.

NOTE

Note on AUTO operation

In AUTO operation, the system selects an appropriate operation mode (COOLING 
or HEATING) based on the room temperature at the start of the operation.

The system automatically reselects setting at a regular interval to bring the room 
temperature to user setting level.

If you do not like AUTO operation, you can manually select the operation mode and 
setting you like.

Note on MOISTURIZING operation

The relative humidity is higher than in normal operation.

Can be used for COOLING, DRY COOLING, HEATING and HUMID HEATING.

The operation noise is slightly louder.

• HEATING: Red
• COOLING: Green

18˚C – 30˚C

<

MOISTURIZING

>

1, 2

1

2

<

AUTO

>

Yellow

Green

Orange

Green

01_EN_3P190650-1D.fm  Page 9  Tuesday, March 6, 2007  6:26 PM

Summary of Contents for FTXR50EV1B9































Reviews: