3 About the system
Operation manual
4
FTXP-N
Daikin room air conditioner
3P511999-8Q – 2022.06
WARNING
Improper detergents or cleaning
procedure may cause damage on
plastic components or water leakage.
Splashed detergent on electric
components, such as motors, may
cause failure, smoke or ignition.
DANGER: RISK OF
ELECTROCUTION
Before cleaning, be sure to stop the
operation, turn the breaker OFF or pull
out the supply cord. Otherwise, an
electrical shock and injury may result.
WARNING
Stop operation and shut OFF the
power if anything unusual occurs
(burning smells etc.).
Leaving the unit running under such
circumstances may cause breakage,
electrical shock or fire. Contact your
dealer.
3
About the system
WARNING: MILDLY FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
NOTICE
Do NOT use the system for other purposes. In order to
avoid any quality deterioration, do NOT use the unit for
cooling precision instruments, food, plants, animals, or
works of art.
3.1
Indoor unit
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. When the fan is rotating at high speed, it will
cause injury.
INFORMATION
The sound pressure level is less than 70 dBA.
WARNING
▪ Do NOT modify, disassemble, remove, reinstall or
repair the unit yourself as incorrect dismantling or
installation may cause an electrical shock or fire.
Contact your dealer.
▪ In case of accidental refrigerant leaks, make sure there
are no naked flames. The refrigerant itself is entirely
safe, non-toxic and mildly flammable, but it will
generate toxic gas when it accidentally leaks into a
room where combustible air from fan heaters, gas
cookers, etc. is present. Always have qualified service
personnel confirm that the point of leakage has been
repaired or corrected before resuming operation.
INFORMATION
The following figures are just examples and may NOT
completely match your system layout.
3.1.1
Indoor unit display
ON/OFF
a
b
c
d
a
Signal receiver
b
Operation lamp
c
Timer lamp
d
ON/OFF button
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on
the indoor unit to start/stop operation. When operation is started
using this button, the following settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.2
About the user interface
Wireless remote control
INFORMATION
The indoor unit is delivered with the wireless remote
control as the user interface. This manual describes only
operation with this user interface. If another user interface
is connected, refer to the operation manual of the
connected user interface.
▪
Direct sunlight.
Do NOT expose the wireless remote control to
direct sunlight.
▪
Dust.
Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪
Fluorescent lights.
Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪
Other appliances.
If the wireless remote control signals operate
other appliances, move the other appliances, or contact your
installer.
▪
Curtains.
Make sure that curtains or other objects do NOT block
the signal between the unit and the wireless remote control.
