Daikin FTXP50M2V1B Installer'S Reference Manual Download Page 4

Page: 4 / 52

General safety precautions

Installer reference guide

FTXP50~7 FTXF20~7 ATXF50~71A2V1B

Daikin room air conditioner

4P513661-8H – 2019.12

1 General safety precautions

1.1 About the documentation

▪

The original documentation is written in English. All other languages are
translations.

▪

The precautions described in this document cover very important topics, follow
them carefully.

▪

The installation of the system, and all activities described in the installation
manual and in the installer reference guide MUST be performed by an authorised
installer.

1.1.1 Meaning of warnings and symbols

DANGER

Indicates a situation that results in death or serious injury.

DANGER: RISK OF ELECTROCUTION

Indicates a situation that could result in electrocution.

DANGER: RISK OF BURNING

Indicates a situation that could result in burning because of extreme hot or cold
temperatures.

DANGER: RISK OF EXPLOSION

Indicates a situation that could result in explosion.

WARNING

Indicates a situation that could result in death or serious injury.

WARNING: FLAMMABLE MATERIAL

CAUTION

Indicates a situation that could result in minor or moderate injury.

NOTICE

Indicates a situation that could result in equipment or property damage.

INFORMATION

Indicates useful tips or additional information.

Symbols used on the unit:

Summary of Contents for FTXP50M2V1B




















































Search results

Summary of Contents for FTXP50M2V1B

Reviews:

Related manuals for FTXP50M2V1B

Brands by name

Popular brands

Daikin FTXP50M2V1B, Installer'S Reference Manual

Search results

Summary of Contents for FTXP50M2V1B

Reviews:

Related manuals for FTXP50M2V1B

Brands by name

Popular brands