background image

42

When the Need Arises

FAQ

Indoor unit

Outdoor unit

The air conditioner stops generating 

airflow during HEAT operation.

• 

Once the set temperature is reached, the airflow rate is 
reduced and operation stopped in order to avoid 
generating a cool airflow. Operation will resume 
automatically when the indoor temperature falls.

The flaps do not start swinging 

immediately.

• 

  The air conditioner is adjusting the position of the flaps. 

The flaps will start moving soon.

Commonly occurring sounds.

 

„

  A sound like flowing water

• 

  This sound is generated because the refrigerant in 

the air conditioner is flowing.

• 

  This is a pumping sound of the water in the air 

conditioner and can be heard when the water is 
pumped out from the air conditioner during COOL or 
DRY operation.

• 

This sound is generated during COOL operation on 
outdoor ambient lower than 12°C when outdoor fan 
stop for keep pressure.

 

„

 Blowing sound

• 

This sound is generated when the flow of the 
refrigerant in the air conditioner is switched over.

 

„

  Ticking  sound

• 

  This sound is generated when the cabinet and 

frame of the air conditioner slightly expand or shrink 
as a result of temperature changes.

 

„

 Whistling  sound

• 

  This sound is generated when refrigerant flows 

during defrosting operation.

 

„

 Clicking sound during operation or idle time

• 

  This sound is generated when the refrigerant control 

valves or the electrical parts operate.

 

„

 Clopping  sound

• 

  This sound is heard from the inside of the air conditioner 

when the exhaust fan is activated while the room doors 
are closed. Open the window or turn off the exhaust fan.

 

„

Hissing/Cracking sound

• 

  The sound of the streamer discharge. 

 

It is not a malfunction.

The outdoor unit emits water or steam.

 

„

 In HEAT operation

• 

  The frost on the outdoor unit melts into water or steam when the air 

conditioner is in defrosting operation.

 

„

In COOL or DRY operation

• 

 Moisture in the air condenses into water on the cool surface of the outdoor 
unit piping and drips.

HEAT operation stops suddenty and 

a flowing sound is heard.

• 

The outdoor unit is defrosting. HEAT operation starts 
after the frost on the outdoor unit has been removed.
This can take about 4 to 12 minutes.

Operation does not start soon.

 

„

When 

 

was pressed soon after operation 

was stopped.

 

„

When the mode was reselected.

• 

 This is to protect the air conditioner.

 

You should wait for about 3 minutes.

   

   

 

Summary of Contents for FTXM50WVMA

















































Reviews: