background image

32

 

TIMER Operation

 

„

Confirming a reservation

• 

The reservation can be confirmed.

Normal

Setting Displays

Confirmation

1. 

Press 

 .

• 

The day of the week and the reservation number of the current day will be displayed.

2. 

Press 

 to select the day of the week and the 

reservation number to be confirmed.

• 

Pressing 

 displays the reservation details.

• 

To change the confirmed reserved settings, select the reservation number and press 

 .

 

The mode is switched to setting mode. Proceed to 

Setting mode

 

STEP

 

4

 Page  29

3. 

Press 

 to exit the confirmation mode.

• “

 

 ” appears on the LCD and WEEKLY TIMER operation is activated.

• 

The TIMER lamp lights orange.

Display

 

„

To deactivate WEEKLY TIMER operation

   Press 

 while “ 

 ” is displayed on the 

LCD.

• 

“ 

 ” disappears from the LCD.

• 

The TIMER lamp goes off.

• 

To reactivate the WEEKLY TIMER operation, press 

 again.

• 

If a reservation deactivated with 

 is activated once again, the last reservation mode 

will be used.

NOTE

• 

If not all the reservation settings are reflected, deactivate the WEEKLY TIMER operation once. Then press 

 again to reactivate the 

WEEKLY TIMER operation.

   

   

 

Summary of Contents for FTXM50WVMA

















































Reviews: