background image

Useful Functions

16

NOTE

Note on COMFORT AIRFLOW operation

• The airflow rate will be set to AUTO. If the up and down airflow direction is selected, COMFORT AIRFLOW operation will be cancelled.

Notes on INTELLIGENT EYE operation

• Application range is as follows.

90°

55°

7m

55°

Vertical angle 90°

(Side view)

Horizontal 

angle 110°

(Top view)

7m

• The sensor may not detect moving objects further than 7m away. (Please see the application range)
• Sensor detection sensitivity changes according to the indoor unit location, the speed of passers-by, temperature range, etc.
• The sensor could also mistakenly detect pets, sunlight, fluttering curtains and light reflected off of mirrors as passers-by.
• INTELLIGENT EYE operation will not switch on during POWERFUL operation.
• NIGHT SET mode 

 Page 20

 will not switch on during use of INTELLIGENT EYE operation. 

Note on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation

• The airflow rate will be set to AUTO. If the up and down airflow direction is selected, COMFORT AIRFLOW operation will be canceled.

 

Priority is given to the function of whichever button is pressed last.

INTELLIGENT EYE operation is useful for energy saving

 

„

People is detected in the sensing area.

 

„

No people are detected in the sensing area.

The air conditioner is in normal operation while the 
sensor is detecting human movement.

The air conditioner will switch to energy-saving mode after 
20 minutes.

Energy saving operation

• If no presence detected in the room for 20 minutes, energy saving operation starts automatically.
• This operation changes the temperature by –2°C in HEAT / +2°C in COOL / +2°C in DRY operation from the set temperature. 

 

When the room temperature exceeds 30°C, the operation changes the temperature by +1°C in COOL / +1°C in DRY operation from the 
set temperature.

• This operation decreases the airflow rate slightly in FAN operation only.

01_EN_3P372379-2B.indd   16

6/27/2014   9:26:08 AM

Summary of Contents for FTXM50PVMA









































Reviews: