background image

1

 | 

About the documentation

User reference guide

5

FTXF50~7 FTXF50~71A2V1B
Daikin room air conditioner
4P513685-9E – 2021.07

DANGER: RISK OF BURNING/SCALDING

Indicates a situation that could result in burning/scalding because of extreme hot or
cold temperatures.

DANGER: RISK OF EXPLOSION

Indicates a situation that could result in explosion.

WARNING

Indicates a situation that could result in death or serious injury.

WARNING: FLAMMABLE MATERIAL

CAUTION

Indicates a situation that could result in minor or moderate injury.

NOTICE

Indicates a situation that could result in equipment or property damage.

INFORMATION

Indicates useful tips or additional information.

Symbols used on the unit:

Symbol

Explanation

Before installation, read the installation and operation
manual, and the wiring instruction sheet.

Before performing maintenance and service tasks, read the
service manual.

For more information, see the installer and user reference
guide.

The unit contains rotating parts. Be careful when servicing or
inspecting the unit.

Symbols used in the documentation:

Symbol

Explanation

Indicates a figure title or a reference to it.

Example: 

"  1–3 Figure title" means "Figure 3 in chapter 1".

Indicates a table title or a reference to it.

Example: 

"  1–3 Table title" means "Table 3 in chapter 1".

Summary of Contents for FTXF50D2V1B









































Reviews: