![background image](http://html1.mh-extra.com/html/daikin/ftnv20jvak/ftnv20jvak_installation-manual_2459378015.webp)
English
13
Attach insulation sleeve
Round crimp-style terminal
Electric wire
All wires must be
fi
rmly connected.
All wires must not touch the refrigerant piping, compressor or any moving parts of the fan motor.
The connecting wires between the indoor unit and the outdoor unit must be clamped on the wire clamps.
The power supply cord must be equivalent to H07RN-F which is the minimum requirement.
Make sure no external pressure is applied to the terminal connectors and wires.
Make sure all the covers are properly
fi
xed to avoid any gap.
Use round crimp-style terminal for connecting wires to the power supply terminal block. Connect the wires by matching
to the indication on terminal block. (Refer to the wiring diagram attached on the unit).
•
•
•
•
•
•
•
Connect wires of the
same gauge to both side.
Do not connect wires of the
same gauge to one side.
Do not connect wires
of different gauges.
Used the correct screwdriver for terminal screws tightening. Unsuitable screwdrivers can damage the screw head.
Over tightening can damage the terminal screws.
Do not connect wire of different gauge to same terminal.
Keep wiring in an orderly manner. Prevent the wiring from obstructing other parts and the terminal box cover.
•
•
•
•
1-IM-5WMJ(R)-0714(2)DAIKIN(SASO)13 13
1-IM-5WMJ(R)-0714(2)DAIKIN(SASO)13 13
5/22/15 4:27:18 PM
5/22/15 4:27:18 PM