background image

When drying the filter, do not heat it with fire. 

   It may cause burning.

Do not use such as gasoline, benzine, thinner,

   polishing powder and liquid insecticide sold
   in the market.
   It may cause discoloration and deformation.

11

NOTE

Do not wash the air filter with water of 50°C or 

higher. It may cause decolorization and 

deformation.

2

Keep holding the clips at the upper part of the 
suction grille and pull them to frontward.

3. Take out the air filter. 

Refer to the Clause 2 for “

HOW TO CLEAN THE 

AIR FILTER

”. (page 10)

4. Clean the suction grille.

Wash the suction grille with water or neutral 
detergent using a soft brush and then dewater it.

When the suction grille is extremely contaminated

Spray the detergent for a ventilating fans and 
ranges directly to the grille, and keep them under 
that condition for about 10 minutes.
After that, carefully wash the suction grille with 
water.

NOTE 

Do not wash the suction grille with water of 

50°C or higher.

It may cause discoloration and deformation.

When drying the suction grille, do not heat it 

with fire. It may cause burning.

Do not use such as gasoline, benzine, thinner, 

polishing powder and liquid insecticide sold 

in the market.

It may cause discoloration and deformation.

5. Attach the air filter.

Refer to the Clause 4 for “

HOW TO CLEAN THE 

AIR FILTER

”. (page 11)

6. Attach the suction grille.

Attach the grille in the reverse order mentioned 
in the Clause 2.

Clip

Clips

Detergent

(The other grille is similar.)

4. Attach the air filter.

After the air filter is cleaned, return the air filter to 
the original place as it was attached before.

5. Close the suction grille.

Slide all the knobs in the reverse order mentioned
in the Clause 1 and securely fix the grille.

6. Turn off the indication “

” or “Time to clean 

filter” displayed on the remote controller after 

turning on the power.

For details, refer to the operation manual 
attached to the remote controller. The 
indication can be turned off whether in 
operation or at stop.

HOW TO CLEAN THE SUCTION GRILLE

1. Open the suction grille.

Slide the knob to the arrow direction and slowly 
open the suction grille.  

2. Remove the suction grille.

1

Keeping the suction grille open, remove the 
strap.

Knob

Knobs

Strap

(The other grille is similar.)

FHA50·60  : 2 places
FHA71·85·100·125·140  : 3 places

FHA50·60  : 2 places
FHA71·85·100·125·140  : 3 places

Summary of Contents for FHA100BVMA





















Reviews: