background image

8

AIRFLOW DIRECTION ADJUST

There are 2 ways of adjusting the airflow direction.
(When the operation stops, the horizontal blades 

blades) close automatically.)

1.

A. Up and down direction

2.

B. Left and right direction

A. UP AND DOWN DIRECTION

Press the AIRFLOW DIRECTION ADJUST 

button to select the air direction as following.

swings as shown the left and 
the airflow direction continuously 
varies. (Automatic swing setting)

Press AIRFLOW DIRECTION 
ADJUST button to select the air 
direction of your choice.

The AIRFLOW DIRECTION 
display stops swinging and the
airflow direction is fixed (Fixed 
airflow direction setting).

A. Up and down
    direction

B. Left and right direction

Fig. 2

swing

MOVEMENT OF THE HORIZONTAL BLADE

For the following conditions, micro computer 
controls the airflow direction so it may be different 
from the display.

NOTE

When group control is performed on the 
simultaneous operation system (twin and triple), 
airflow direction cannot be individually set on the 
slave units.

We recommend using the fan in the position shown 
above when fixing the fan direction.

Operation 
mode

COOLING

AUTOMATIC 
COOLING

PROGRAM 
DRY

HEATING

AUTOMATIC 
HEATING

Up and 
down 
direction

When operating 
continuously at 
downward 
airflow direction
(Air blows in the 
automatically set 
direction for a 
period of time
to prevent 
condensation 
on the horizontal 
blades.)

When room 
temperature is 
higher than the 
set temperature

When the 
HEATING 
OPERATION 
starts or during 
the DEFROST 
OPERATION (if 
frost forms on 
the outdoor unit)
(The airflow 
direction 
becomes 
horizontal so 
that it does not 
blow directly 
toward your 
body.)

Indoor 

unit

(Slave)

Indoor 

unit

(Master)

Outdoor 

unit

Outdoor 

unit

Triple

Remote 

controller

Twin

Indoor 

unit

(Slave)

Recommended airflow direction positions

Cooling

Heating

at the air outlet (Up and down direction adjustment

The AIRFLOW DIRECTION display

Summary of Contents for FHA100BVMA





















Reviews: