11
Ducted Air Conditioners
Installation Manual
Method of wiring.
- Refer to Fig. 14 for the wiring details.
NOTE: All wires must be wired through bushes at the bottom of the electrical box.
•
Remove the electrical box cover as indicated.
•
Power and earth wiring.
Connect the power supply wires to terminals (L, N). and earth wire to terminal .
Secure the cable to the anchor point below the terminal block. Do not connect the N-line with the
earth terminal.
•
Wiring between indoor and outdoor units.
Connect the transmission wire between the indoor and outdoor unit using terminals (1, 2, 3).
Secure the cable to the anchor point below the terminal block.
•
Remote controller cords.
Connect the cords to the remote controller terminals - (P1, P2 No polarity) and the shield wire
(if applicable) to the shielding earth terminal .
Secure the cable to the anchor point below the terminal block.
•
Replace and secure electrical box cover.
Fig. 14
FDYQ(T)(N)71-160LBV1, LCV1
