![background image](http://html1.mh-extra.com/html/daikin/fdq16py1/fdq16py1_operation-manual_2460393012.webp)
10
English
HOW TO OPERATE THE TIMER
• The above display indicates “AFTER 3 HOURS CUT OFF”
and “AFTER 4 HOURS TURN ON”.
• The illustrations in this operating manual correspond to the
remote controller format BRC1C type.
• In the case of using a remote controller other than the
BRC1C type one, refer to the operation manual provided to
the remote controller.
STEP 1
Press
button, and select “hr
” (timer off) or “hr
”
(timer on). Pressing the button changes the display as follows:
STEP 2
Press
button, and set the time you want.
When this button is pressed, the time advances by 1 hour.
When this button is pressed, the time goes backward by 1
hour.
STEP 3
Press
button.
The timer setting is completed.
“hr
” or “hr
” display changes from flashing to on.
hr
hr
STEP 1
STEP 3
STEP 2
“hr ”
“hr ”
No Display
NOTE
The timer can be programmed a maximum of 72 hours.
NOTE
After the time is programmed, the display shows the
remaining time.
To cancel program timer
CANCEL
Press
button again, and the display disappears.
OPERATION MODE
When you want to start the system after a time you desire
elapses:
When you want to stop the system after operating it for a
time you desire:
Example
If you adjust the time to “
”.
It indicates “ hr ( )”.
After 8 hours from making a
reservation, the operation starts.
After the operation starts, the
reservation is cancelled.
Example
If you adjust the time to “
”.
It indicates “ hr ( )”.
After 8 hours from making a
reservation, the operation stops.
After the operation stops, the
reservation is cancelled.
01_EN_3PR05311-1.fm Page 10 Tuesday, June 2, 2009 3:36 PM