Service Diagnosis
SiSG121917E
111
Part 6 Service Diagnosis
3.2.2 Method 2
1. Press the center of
TEMP
button and
MODE
button at the same time to enter the diagnosis
mode.
The left-side number blinks.
2. Press
TEMP
or
TEMP
button and change the number until you hear the two
consecutive beeps or the long beep.
3. Diagnose by the sound.
Beep: The left-side number does not correspond with the error code.
Two consecutive beeps: The left-side number corresponds with the error code but the
right-side number does not.
Long beep: Both the left-side and right-side number correspond with the error code.
The numbers indicated when you hear the long beep are the error code. Error codes and
description
Refer to page 114, 115.
4. Press
MODE
button.
The right-side number blinks.
(R19114)
(R14967)
(R19115)
(R19116)
(R1496
8
)