AIRFLOW DIRECTION ADJUST
Airflow direction adjustment can be done by remote
controller.
For details about airflow direction adjustment, refer to
operation manual attached to remote controller.
Up and down
The airflow direction can be adjusted in either of the
following.
• Swing
The horizontal blade continuously varies.
• Fixed airflow direction
The horizontal blade can be fixed by the user.
<Swing>
Indoor unit
D
<Fixed airflow direction>
Indoor unit
D
Cf\)
.)
\..
(Automatic)
(Automatic)
(Desired position)
(Desired position)
MOVEMENT OF THE HORIZONTAL BLADE
For the following conditions, micro computer controls the
airflow direction so it may be different from the display.
• COOLING
Operation
• FAN
mode
• PROGRAM DRY
Up and
• When operating continuously at
down
horizontal airflow direction (Air
direction
blows in the automaticallyset
direction for a period of time to
prevent condensation on the
horizontal blades.)
27
Recommended airflow direction position
-
□
--;.
--
Cooling
V*
We recommend using the fan in the position shown above
when fixing the fan direction.
7. OPTIMUM OPERATION
Observe the following precautions to ensure the system
operates.
• Adjust the room temperature properly for a comfortable
environment. Avoid excessive cooling.
• Prevent direct sunlight from entering a room during
cooling operation by using curtains or blinds.
• Keep doors and windows closed. If the doors and
windows remain open, room air will flow out and cause
to decrease the effect of cooling.
• Never place objects near the air inlet and the air outlet
of the unit. It may cause deterioration in the effect or
stop in the operation.
• Install TV, radios, and stereos 1 m or more away from
the indoor unit and remote controller.
Images may become fuzzy and noise may be generated.
• Turn off the main power supply switch when it is not
used for long period of time.
• Turn off the main power supply switch for saving energy.
When reoperating, turn on the main power supply switch
6 hours before operation for smooth running.
(Refer to
11
8. MAINTENANCE" on page 6).
• Fully use the function of air flow direction adjust.
Cold air gathers on the floor.
Set the air direction to horizontal during the COOLING .
Do not let the air blow directly to a person.
• It takes time for the room temperature to reach the set
temperature.
We recommend starting the operation in advance using
timer operation.
