Daikin FCW15ARV16, Installation Manual

Page: 33 / 35

9
11
5
3
10
12
--
--
--
-
--
I
�DAIKIN
ll!JD @STD .& ij' a11
ml!!I
IBBs
'F
c,-e
*;�·� .
'C
C
.� 4'00�(;,tcl
ilia� .-:-;�.; ,erg
THUFRI OFF
MONTUEWE
r
N
aa·BB
SAT SUN
a
�NaB:BBBt
( MODE
l (
ON/OFF)
(. FAN
J
LP
OW
�
HILL
I
� � ECONO)
(<:
,C SWING
J
-
-
-
[TeP]
( C7 GOOD SLEE�-
�CHILD LOCK)-
COANDA DISPLAY
(ii')� -
�
-
E
I
ARC91A156
5. ECONO button:
�
�
�
�
�
f--
�
1 Operation Manual of Remote Controller
(ARC91A156)
2 1. Signal transmitter
4
8
6
14
7
Sends signals to the indoor unit.
2. Display (LCD):
Displays the current settings.
(In this illustration, each section is shown with its displays on for the
purpose of explanation).
3. TEMPERATURE Adjustment button:
To change the temperature setting by pressing TEMP UP
and TEMP DOWN buttons. Press
TEMP UP
to raise the
temperature and press
TEMP DOWN
to lower the temperature.
COOL Operation : 16-32
°
C
DRY or FAN Operation : The temperature setting cannot
be changed and is not shown on remote LCD
NOTE:
a) Whenever air conditioner will be switched on from remote, the
16
default set temperature will be set as mentioned in below table :
15
13
Mode
Set temperature before Set temperature after
remote switched OFF
remote switched ON
Cool
If Set temperature < 24 ° C Default set temperature will be 24 ° C
If Set temperature >= 24 ° C Default set temperature will besame as set
4. ON/OFF button:
Press this button once to start the operation.
Press once again to stop the operation.
ECONO operation enables efficient operation by limiting the maximum power consumption.
Press this button once to start the ECONO operation, Set temperature is 26
°
C(Fixed) and fan speed is
set to medium (Not changeable).
Press once again to disable the ECONO operation, last set parameters memorised will be recalled
which were set before ECONO operation.
ECONO operation can only be set when unit is running. Pressing ON/OFF button causes the ECONO
to be cancelled.
ECONO operation functions in COOL mode only.
ECONO and POWER CHILL operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
6. SWING button:
User can adjust the airflow direction to increase your comfort. The flaps will begin to swing.
7. CHILD LOCK button:
Setting the CHILD LOCK disables all the buttons except the CHILD LOCK button. This function prevents
children from operating the remote controller by mistake. Press this button for about 5 seconds, CHILD
LOCK will be enabled and following the same manner, CHILD LOCK can be disabled.
8. POWER CHILL button:
POWER CHILL operation quickly Maximizes the cooling effect in COOL and DRYoperation only. In this
mode, the air conditioner operates at maximum capacity. When POWER CHILL is activated , the flaps will
be adjust at maximum air flow position.
POWER CHILL operation ends in 20 minutes. Then the system automatically operates again with the
previous settings which were used before POWER CHILL operation.
33