8
English
(2)
Remove the front panel and the control box cover. (Refer to Fig. 7)
< How to remove the front panel and control box cover >
(1) Open the front panel to the point where it stops.
(2) Push the hook on either side of the front panel towards the center of the main unit and remove. (You can
also remove it by sliding the front panel either to the left or right and pulling it forward.)
(3) Remove the screw from the control box cover and pull the handle forward.
(3)
Point the pipe in the direction it will be passed out.
For right, bottom-right, and back-right piping (Refer to Fig. 8)
•
Wrap the drain hose and the refrigerant piping together with the
insulating tape (3) so that the drain hose is below the refrigerant
piping.
For left, bottom-left, and left-back piping
•
Remove the front grille.
(Refer to Fig. 9)
< How to remove the front grille >
(1) Remove the screws grille clamps and tabs securing the front grille.
(2) Remove the front grille.
Hook
Hook
Hook
Fig. 7
Handle
Screw
Control box cover
Front panel
(1)
(2)
(2)
(3)
Insulating tape (3)
(accessory)
Refrigerant piping
Drain hose
Fig. 8
Tab position
(3 places)
Tab position
(4 places)
Screw position (6 places)
Screw position
(3 places)
Grille clamp
positions (3 places)
Fig. 9
Tab
Front grille securing positions
for 71 class
Front grille securing positions
for 100 class
How to remove
grille clamps
(for 100 class only)
Remove the clamps
under the front grille
with a flat screwdriver.
Flat screwdriver,
etc.
4PEN468968-1C.book Page 8 Friday, March 24, 2017 1:30 PM