Read before Operation
Name of Parts
■
Indoor Unit
1
2
3 4
5
-�
l""'"'==C--------1
�
�
,
_
� � �
:
: :
: :
.
"'
.
1-I
LJL:S
I �
10
9
8
6
7
1
1
1
1i2
CJ .. /
13
�
14
15
■
Outdoor Unit
22
21
@::
'----'-'--""-- 1 9
I
6
�
=---
-=------ 20
Appearance of the indoor/outdoor unit may
differ between different models.
D
1. Front panel
2.Air inlet
3.Air filter
4.Accessory filter
5. Model name plate
6. Indoor temperature sensor:
• Detects the air temperature around the unit.
7.Display
a.Air outlet
9. Louvres (vertical blades):
• The louvres are inside of the air outlet.
1
O.
Flaps (horizontal blades)
11. Signal receiver:
• Receives signals from the remote controller.
• When the unit receives a signal, you will
hear a beep sound.
Case
Sound type
Operation start
beep-beep
Settings changed
beep
Operation stop
long beep
12.TEMPRATURE DISPLAY
13. OPERATION lamp (green)
14. TIMER lamp (orange)
15.lndoor unit ON/OFF switch:
• Press & hold maximum upto 5 seconds
to start operation.
Press & hold maximum upto 5 seconds
again to stop it.
• For the operation mode setting, refer to
the following table.
Mode Temperature Airflow rate
setting
COOL
22
°
c
AUTO
• This switch can be used when the remote
controller is missing.
16.Air inlet (back and side)
17. Refrigerant pipes and inter-unit wire
18. Drain hose
19. Earth terminal (inside)
20. Model name plate
21. Air outlet
22. Outdoor temperature sensor (back)
2
