0
I
t'
Temperature Display
• When "Good Sleep/Display" key of remote controller push down and hold it for � 2 second then
"DISPLAY" IR Signal will be transmitted.
• The temperature display for the indoor unit shows the current indoor temperature, and set
temperature.
■
Checking indoor temperature and set temperature when air conditioner is in
operation.
GOOD SLEEP/
1. Press [O/iii) for � 2 seconds during operation
DISPLAY
GOOD SLEEP/
• Each press of
l�f!l
for � 2 seconds, Cycles the display through current indoor
temperature, and set temperature.
DI
No display (Default)
Indoor temperature
Set temperature
• There is a" . "(dot) after the set temperature figure.
• Set temperature does not display when the unit is in DRY operation or FAN
operation.
• Set temperature may not display depending on the operation mode that is
active.
• The display turns off when the unit is turned off.
■
Checking current indoor temperature when the air conditioner is off
1. Press"foi�1
1
when the air conditioner is OFF and remote is ON.
DISPLAY
• The current indoor temperature displays.
• Press the button again to turn off the display.
NOTE
■ Note on the inverter output and temperature display
• An error code will display if the air conditioner fails to operate when turned on. Consult
your service centre. Refer to the error code table in ''Troubleshooting". IBllfJ
10
