D
–EIMWC00508-16EN - 5/48
Checks
To prevent the possibility of incomplete delivery (missing parts) or transportation damage, please perform the following checks
upon receipt of the machine:
a) Before accepting the machine, please verify every single component in the consignment. Check for any damage.
b) In the event that the machine has been damaged, do not remo ve the damaged material. A set of photographs are helpful
in ascertaining responsibility.
c) Immediately report the extent of the damage to the transportation company and request that they inspect the machine.
d) Immediately report the extent of the damage to the manufacturer representative, so that arrangements can be made for
the required repairs. In no case must the damage be repaired before the machine has been inspected by the
representative of the transportation company.
Purpose of this manual
The purpose of this manual is to allow the installer and the qualified operator to carry out all required operations in order to ensure
proper installation and maintenance of the machine, without any risk to people, animals and/or objects.
This manual is an important supporting document for qualified personnel but it is not intended to replace such personnel. All
activities must be carried out in compliance with local laws and regulations.
Important information on the refrigerant used
This product contains fluorate gases which have a greenhouse effect and which are covered by the Kyoto protocol. Do not
release such gases into the atmosphere.
Type of refrigerant: R410A
GW P value
(1)
= 2087,5
The quantity of refrigerant used is indicated on the identity plate with the name of the unit.
Routine inspections may be necessary pursuant to local and/or European laws, to check on possible refrigerant leakage. For
more detailed information, contact your local dealer.
(1)
GW P=Global warming potential
Description of the labels applied to the electrical panel
Single
Compressor unit
1
– Lifting instructions
6
– Gas type
2
– Unit nameplate data
7
– Hazardous Voltage warning
3
– Non flammable gas symbol
8
– Cable tightening warning
4
– Manufacturer’s logo
9
– Water circuit filling warning
5
– Emergency stop
10
– Electrical hazard symbol
Summary of Contents for EWWQ380B-SS
Page 8: ...D EIMWC00508 16EN 8 48 Fig 1 Lifting the unit...
Page 45: ...D EIMWC00508 16EN 45 48...
Page 46: ...D EIMWC00508 16EN 46 48...
Page 47: ...D EIMWC00508 16EN 47 48...
