24
7: Wind direction auto swing
Note: Guidelines for wind direction value and
actual direction
Screen 3 Advanced Operation
The contents of Display on Screen 3 Advanced
Operation are as shown below.
!0
Filter Sign Status
When Yes/No is shown in black, the filter sign is
illuminated.
!2
Shows the current wind direction.
Indicated with a figure between 0 and 7 inclusive.
The larger the value for wind direction setting
(0 - 6), the closer to vertical the direction
becomes. The value 7 indicates automatic
swing.
(Note: See below.)
The description given above may not exactly
apply depending on the model. Check the
wind direction sign on the remote control after
operation.
!1
Element Sign Status
When Yes/No is shown in black, the element
sign is illuminated.
(The example on the left shows the filter sign
illuminated.)
!3
Shows the current wind volume.
Low or High is shown.
!4
Shows the remote control setting for starting or
stopping operation. One of the following is
shown:
Prohibited
Stop Only
Permitted
!5
Shows the remote control setting for the
operation mode. One of the following is shown:
Prohibited
Permitted
Screen 2 Operation on the previous page
reappears.
Pressing the Cancel button
o
on that screen
brings you back to Screen 1 Monitoring.
This screen is for both operation and
monitoring. When you have used the
screen for monitoring only, press the
Cancel button rather than the OK
button to exit the window to prevent
wrong operation.
Continued from the previous page
10
11
12
14
15
16
17
13
0
4
5
6
Caution
!6
Shows the remote control setting for the
temperature setting. One of the following is
shown:
Prohibited
Permitted
4.
When all the settings have been
confirmed, press the Cancel button
!7
.
Indoor unit
Oper
ation
