Cycles Per Hour (Setup step 15)
The Cycles Per Hour setting may limit
the number of times per hour your
HVAC unit may energize. For example,
at a setting of 6 cycles per hour the
HVAC unit will only be allowed to
energize once every 10 minutes. The
Cycles Per Hour limit may be overridden
and reset by pressing the WARMER or
COOLER buttons on the thermostat.
Settings are No Limit, 2, 3, 4, 5, or 6
cycles per hour.
Compressor Minimum
Off Minutes (Setup step 16)
This feature allows the user to set a
minimum off time for the compressor.
Settings are 0 to 5 mins.
Minimum Heat/Cool
Setpoint Difference (Setup step 17)
This feature allows the user to set the
minimum gap between Heat and Cool
setpoints in AUTO mode. Select from 0
to 6 degrees.
Installer Setup
22
