Programming a Daily Schedule
30
Adjust the Unoccupied Heat Setpoint –
Press the Warmer or Cooler
button to adjust the Heating setpoint for times when the thermostat
is in Unoccupied.
The following steps determine when the Occupied period(s)
will be active.
Enable Occupied 1 –
Press the Warmer or Cooler button to enable
(On) or to disable (Off) Occupied 1 on Monday.
Adjust the Start Time for Occupied 1 –
Press the Warmer or Cooler
button to adjust the start time for Occupied 1 on Monday.
Adjust the Stop Time for Occupied 1 –
Press the Warmer or Cooler
button to adjust the stop time for Occupied 1 on Monday.
Upon pressing MODE after the above step; you will be prompted to
Save and Exit or Copy this Occupied schedule to another day.
To save and exit –
Press the MODE and WARMER button.
To Copy Monday’s settings/schedule to Tuesday –
Press Up
and then MODE. Press MODE again to copy the Monday
Settings/schedule to subsequent days.
To Program Another Day –
Press MODE and then press the
WARMER/COOLER button to select the day to program. Repeat
the above steps for each day you would like to program.
Press and hold the MODE/WARMER Buttons to exit Time Period
Programming at any time.
Continued
