Main Functions
SiBE12-908
24
Function and Control
2. Trial operation mode:
You can select a mode for trial operation on the remote controller.
The operation continues for approx. 30 minutes.
Refer to the installation manual on page 57 for detail.
3. Pipe set mode:
You can set the humidifying hose length and then check the preset value.
Refer to the installation manual on page 56 for detail.
4. Pipe check mode:
You can check the preset value of the humidifying hose length.
Refer to the installation manual on page 56 for detail.
5. Drying mode:
Hose Dry operation is a forced drying operation for humidifying hose.
The operation continues for approx. 30 minutes.
Cooling, heating, or dry operation is not available during Hose Dry operation.
Refer to the installation manual on page 57 for detail.
6. Humidifying airflow rate setting mode:
Humidifying airflow rate setting mode allows to fine-tune the speed of the humidifying fan
around ±10% relative to Automatic. Set high to increase the airflow rate, or set to low to
decrease.
7. Monitor brightness setting mode:
The brightness of the multi-colored indicator lamp can be adjusted H (high), L (low), or OFF.
