SiBE12-908
Service Check Function
Service Diagnosis
99
7. Press TEMP
▲
or
▼
button and change the figure until you hear the sound of “beep”.
8. Diagnose by the sound.
★
“pi” : The figure of the ten’s place does not accord with the error code.
★
“pi pi” : The figure of the ten’s place accords with the error code but the one’s not.
★
“beep” : The both figures of the ten’s and one’s place accord with the error code.
(
→
See 7.)
9. Determine the error code.
The digits indicated when you hear the “beep” sound are error code.
(Error codes and description
→
Refer to page 100.)
10.Press the MODE button for 5 seconds to exit from the service check mode.
(When the remote controller is left untouched for 60 seconds, it returns to the normal mode.)
