cm-clic-cf-eng
www.clima-flex.com
17
Control
MODE SELECTION
The selection mode screen is divided into 2 sections:
• The mode of the terminal’s work selection or Digital Input.
• Current Work Mode Indicator
The operating mode selection can be configured in 2 ways: By
digital input or by selecting it on the terminal (“Configuration”
section). If the working mode has already been selected by digital
input any further selection on the terminal will be ignored. If the
working mode has been selected by the user on the terminal, it
can only be edited or changed on this screen, ignoring the status
of the digital input.
Setting the Clock
On the clock setting page, the user can set and change the date,
time and the way the date will be displayed: there are 2 options,
regular format (Day-Month-Year) or US format (Month-Day-Year).
Note: This section is only available for systems configured
as “Heat Pump”.
WORK HOUR COUNTER
The “Hours Worked Counter” page will show the number of hours
worked, number of starts of compressors and pumps of the units
configured in the system.
Additionally, the number of times that alarms have been activated
on each specific unit will be displayed.
RESETTING THE WORK HOUR COUNTER
WORK
In this section, accessible with level 1 password, the user is given
the option to reset the counters via buttons for each section. The
counter reset button resets the count of the number of times the
compressor was started, the number of hours worked and the
number of times the pressure suction and discharge digital inputs
were activated.
The pump reset button resets the number of times the pump has
been started and the number of hours worked by the pump.