cm-clic-cf-eng
www.clima-flex.com
13
MAIN SCREEN
The configured devices will display this screen by default as the
main system screen with the following information:
Working System Mode icon, either “Tandem” or “Standalone”
mode 2.
2. Main Unit Injection and Return Temperature, if the system is in
“Tandem” mode or “Mother” Unit Injection and Return Temperature,
if in “Standalone” mode.
3. Injection and Return Temperature of the individual units. This
section only appears if at least one “Child” unit is disabled. In the
case of machines in “Stand-alone” mode this section will not be
displayed.
4. Control Status, can be Enabled, Disabled by a digital input or
disabled by the terminal (pGDTouch).
5. Selection of Temperature Measurement Units (Fahrenheit or
Celsius).
6. Date.
Control
Alarms
Always Visible, sends user to
Alarms page
Home
Sends the user to the Main
Menu
Return to
Sends the user to the last
accessed page
Main Menu
Sends the user to the Main
Menu
Alarm log
Sends the user to the Alarm
Log page
Inputs and Outputs
Sends user to the Inputs and
Outputs screen
Charts
Sends the user to the
Temperature Graphs screen
Configuration of
graphs
Allows the user to configure
the graph display
Summary
Sends the user to the
Summary screen
In the Navigation Menu of the initial screen, the displayed icons
ordered from left to right direct to the following sections:
• Temperature Graphs
• Alarms
• System Review
• Navigation Menu
ALARMS PAGE
It is possible to access the Alarms section from anywhere in the
system, the button is constantly present in the navigation bar.
Depending on whether or not there are active Alarms, the button
will be displayed in one of 2 ways:
Active alarms
By pressing the “No Alarms” button, the user will be presented with
a screen like the one shown below: