English
3
19
RECEIVER
This receives the signals from the
remote controller.
20
OPERATING INDICATOR LAMP (Red)
This lamp stays lit while the air
conditioner runs. It flashes when the
unit is in trouble.
21
TIMER INDICATOR LAMP (Green)
This lamp stays lit while the timer is set.
22
AIR FILTER CLEANING TIME
INDICATOR LAMP (Red)
Lights up when it is time to clean the air
filter.
23
DEFROST LAMP (Orange)
Lights up when the defrosting opera-
tion has started. (For cooling only type
this lamp does not turn on.)
24
FAN/AIR CONDITIONING SELECTOR
SWITCH
Set the switch to “
” (FAN) for FAN
and “
” (A/C) for HEAT or COOL.
25
COOL/HEAT CHANGEOVER SWITCH
Set the switch to “
” (COOL) for
COOL and “
” (HEAT) for HEAT.
NOTES
•
For the sake of explanation, all indica-
tions are shown on the display in Figure 1
contrary to actual running situations.
•
Fig. 1-2 shows the remote controller with
the front cover opened.
•
Fig. 1-3 shows this remote controller can
be used in conjunction with the one pro-
vided with the VRV system.
•
If the air filter cleaning time indicator lamp
lights up, clean the air filter as explained
in the operation manual provided with the
indoor unit.
After cleaning and reinstalling the air fil-
ter, press the filter sign reset button on
the remote controller. The air filter clean-
ing time indicator lamp on the receiver
will go out.
•
The Defrost Lamp will flash when the power
is turned on. This is not a malfunction.
Precautions in handling remote con-
troller
Direct the transmitting part of the remote
controller to the receiving part of the air
conditioner.
If something blocks the transmitting and
receiving path of the indoor unit and the remote
controller as curtains, it will not operate.
Transmitting distance is approximately 7 m.
Do not drop or get it wet.
It may be damaged.
Never press the button of the remote con-
troller with a hard, pointed object.
The remote controller may be damaged.
Installation site
•
It is possible that signals will not be received
in rooms that have electronic fluorescent
lighting. Please consult with the salesman
before buying new fluorescent lights.
•
If the remote controller operated some
other electrical apparatus, move that
machine away or consult your dealer.
Placing the remote controller in the
remote controller holder
Install the remote controller holder to a wall
or a pillar with the attached screw. (Make
sure it transmits)
3. HANDLING FOR
WIRELESS REMOTE
CONTROLLER
2 short beeps
from the receiver
indicates that the
transmission is
properly done.
01_EN_3P107422-10F.fm Page 3 Wednesday, August 31, 2005 1:44 PM
