English
7
DISPLAY appears and the
air flow direction continu-
ously varies. (Automatic
swing setting)
Press AIR FLOW DIREC-
TION ADJUST button to
select the air direction of
your choice.
DISPLAY vanishes the air
flow direction is fixed
(Fixed air flow direction
setting).
Adjusting left/right air flow direction
Angle the flaps to the left/
right from the knob, as
wanted or as needed to air
condition the room.
NOTE
•
Stop flaps from swinging
before trying to angle
them. Working while the
flaps are moving may get your fingers
pinched.
MOVEMENT OF THE AIR FLOW FLAP
For the following conditions, micro computer
controls the air flow direction so it may be
different from the display.
Operation
mode
Cooling
Heating
Operation
conditions
•
When operat-
ing continu-
ously at
downward air
flow direction
•
When room
temperature is
higher than the
set temperature
•
At defrost
operation
(The flaps blow
horizontally to
avoid blowing
cold air directly
on the occupants
of the room.)
NOTE
•
If you try cooling or programmed drying,
while the flaps are facing downward, air
flow direction may change unexpectedly.
There is nothing wrong with the equipment.
This serves to prevent dew formed on parts
in the air discharge outlet from dripping.
•
Operation mode includes automatic
operation.
Operate in the following order.
•
The timer is operated in the following two
ways.
Programming the stop time (
)
.... The system stops
operating after the set time has elapsed.
Programming the start time (
)
.... The system starts
operating after the set time has elapsed.
•
The timer can be programmed a maximum
of 72 hours.
•
The start and the stop time can be simulta-
neously programmed.
TIMER MODE START/
STOP
Press the TIMER MODE START/STOP
button several times and select the
mode on the display.
The display flashes.
For setting the timer stop .... “
”
For setting the timer start .... “
”
PROGRAMMING TIME
Press the PROGRAMMING TIME but-
ton and set the time for stopping or
starting the system.
When this button is pressed, the
time advances by 1 hour.
When this button is pressed, the
time goes backward by 1 hour.
PROGRAM TIMER OPERATION
1
TIMER
2
DOWN
UP
DOWN
UP
01_EN_3P107422-10F.fm Page 7 Wednesday, August 31, 2005 1:44 PM
