![background image](http://html1.mh-extra.com/html/daikin/brc7ea618/brc7ea618_operation-manual_4699134015.webp)
English
11
Press OPERATION MODE SELECTOR
BUTTON
“
” on the right-hand of the malfunction
code blinks.
Press PROGRAMMING TIMER BUT-
TON and change the malfunction code.
Press until the indoor unit makes a long
beep.
The malfunction code is fixed when the
indoor unit makes a long beep.
Reset of the display
Press OPERATION MODE SELECTOR
BUTTON to get the display back to the
normal state.
II.
IN CASE BESIDES EMERGENCY STOP
1. The unit does not operate at all.
•
Check if the receiver is exposed of
sunlight or strong light. Keep receiver
away from light.
5
MODE
6
DOWN
UP
7
MODE
UNITN
O
.
CODE
MODE
TIMER
RESERVE CANCEL
DOWN
UP
/TEST
SWING
FAN
TIME
TEMP
1
2 4
6
3 5
7
ON OFF
2 4
6
•
Check if there are batteries in the
remote controller. Place the batteries.
•
Check if the indoor unit number and
wireless remote controller number are
equal.
Operate the indoor unit with the remote con-
troller of the same number.
Signal transmitted from a remote controller of
a different number cannot be accepted. (If
the number is not mentioned, it is considered
as “1”)
2. The system operates but it does not
sufficiently cool or heat.
•
If the set temperature is not proper.
•
If the FAN SPEED is set to LOW
SPEED.
•
If the air flow angle is not proper.
Contact the place of purchase in the fol-
lowing case.
WARNING
When you detect a burning odor, shut
OFF power immediately and contact the
place of purchase. Using the equipment
in anything but proper working condition
can result in equipment damage, electric
shock and/or fire.
Number
Number
01_EN_3P107422-10F.fm Page 11 Wednesday, August 31, 2005 1:44 PM