English
2
2. BEFORE INSTALLATION
2-1 ACCESSORIES
Check if the following accessories are included with your unit.
2-2 NOTE TO THE INSTALLER
•
Be sure to instruct the customer how to properly operate the system showing him/her the attached opera-
tion manual.
3. REMOTE CONTROLLER INSTALLATION
〈
Installing wireless remote controller
〉
•
Do not throw the remote controller or impose large shocks. Also, do not store where it may be exposed to
moisture or direct sunlight.
•
When operating, point the transmitting part of the remote controller in the direction of the receiver.
•
The direct transmitting distance of the remote controller is approximately 7 meters.
•
The signal cannot be transmitted if something such as curtains blocks the receiver and the remote control-
ler.
• Installing to a wall or a pillar
(1) Fix the remote controller holder with the screws.
(2) Slide the remote controller into the remote controller holder
from the top.
Name
Receiver
Transmitter board
Tapping screw for
transmitter board
Wireless remote
controller
Remote controller
holder
Quan-
tity
1 set.
1 pc.
2 pcs.
1 pc.
1 pc.
Shape
Name
Dry cell battery
LR03 (AM4)
Unit No.
label
Screw for install-
ing remote control-
ler holder
Operation manual
Clamp
Quan-
tity
2 pcs.
1 pc.
2 pcs.
1 pc.
1 pc.
Shape
1
2
3
1
2
3
1
2
3
(1)
(2)
