Daikin BRC2E52C7 Operation Manual Download Page 37

Page: 37 / 64

BRC2E52C7 / BRC3E52C7

Operation manual

4P368042-1 - 2014.02

Menu Manipulation

Energy Saving Options

Energy Saving List

Some functions should not be enabled when a centralised controller is

connected.

Operation Method

Air Flow Direction

Individual Air Direction

Quick Start

Ventilation

Energy Saving Options

Schedule

1/2

Main Menu

Setting

Return

• Display the Main Menu.

(See

"Manipulating the Main Menu" on

page 27

• Press the

(Up/Down) buttons to select

Energy Saving Options

and press the Menu/

Enter button.

Energy Saving List

Setpoint Range

Setback Condition

Sensing Sensor (Low)

Sensing Sensor (Stop)

Setpoint Auto Reset

1/2

Energy Saving Options

Setting

Return

• Press the

(Up/Down) buttons to select

Energy Saving List

and press the Menu/Enter

button.

OFF

2/2

Setpoint Range:

Setback Condition: ON

Sensing Sensor (Low): OFF

Sensing Sensor (Stop): OFF

Setpoint Auto Reset: ON

Off Timer: ON

Energy Saving List

Setting

Return

• Press the

(Up/Down) buttons to change the

setting to

OFF

• Move the cursor using the (Left/Right)

buttons.

• Press the Menu/Enter button when all changes

are made. The confirmation screen will appear.

Yes

Energy Saving List

Save the settings?

Setting

Return

• Press the (Left/Right) buttons to select

Yes

•

Press the Menu/Enter button to confirm the

settings and to return to the Basic Screen.

Summary of Contents for BRC2E52C7
































































Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands

Daikin BRC2E52C7, Operation Manual

Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands