Daikin BRC2E52C7 Operation Manual Download Page 11

Page: 11 / 64

BRC2E52C7 / BRC3E52C7

Operation manual

4P368042-1 - 2014.02

Names and Functions

15. Clock display

(with no clock settings)

16. Detailed selection

(with no detailed items

selected)

17. Timer problem

3. Set temperature

display

(Dual setpoint mode)

2. Fan speed

(with no fan speed

control function)

1. Operation mode

•

Indicates the current operation mode.

Operation Mode

Cool

Heat

Vent

Air Clean

Fan

Dry

Auto (Cool) Auto (Heat)

2. Fan speed

(See

"Cool/Heat/Auto/Fan Operation" on

page 13

)

•

Indicates the fan speed that is set for the

air conditioner.

•

The fan speed will not be displayed if the

air conditioner does not have the fan speed

control function.

3. Set/Setback temperature display

(See

"Setback" on page 17

)

•

When the unit is turned ON, the

temperature that is set for the air

conditioner is displayed.

•

When the unit is turned OFF and Setback

is disabled, the temperature that is set for

the air conditioner is displayed.

•

When the unit is turned OFF and Setback

is enabled, the temperature that is set for

the setback function is displayed.

•

By default, the display method is Single

Setpoint mode. To enable Dual Setpoint

mode, refer to the Installation manual.

4. Defrost/Hot start "

(See

"Hot start (VRV only)" on page 15

•

Indicates that Defrost/Hot start operation is

active.

•

The Defrost/Hot start operation is only

possible when a Heat Reclaim Ventilation

(HRV) unit is connected. For details, refer

to the Operation Manual of the Heat

Reclaim Ventilation unit.

5. Error " "

(See

"Error Code Display" on page 60

)

•

Indicates a unit error or warning.

" Clean filter "

(See

"Reset Filter Indication" on

page 58

)

•

Indicates that the time to clean the filter

has come.

7. " Clean element " "

(See

"Reset Filter Indication" on

page 58

)

•

Indicates that the time to clean the element

has come.

Summary of Contents for BRC2E52C7
































































Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands

Daikin BRC2E52C7, Operation Manual

Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands