manualshive.com logo in svg

Daikin BRC1E73, Installation And Operation Manual, Page: 65 / 80

Share
Download
Daikin BRC1E73 Installation And Operation Manual Download Page 65

EDUS721438

Installation Manual

BRC1E73

63

3P243521-7L

8 

English

 

Ɣ

To prevent electrical noise and possible communication errors, avoid installing the 
remote controller wiring parallel to or in the vicinity of line voltage circuits.

NOTE

Installation procedure for the lower case.

3-6 

When wiring the remote controller through the top center or rear access points, attachment of the 
wire to the lower case is required before it is wall mounted. Closely follow the wiring 
procedures.

Wall installation

3-6-1 

Secure by using furnished drywall anchors and screws (2 pcs.).

Drywall screws

Drywall anchors

Switch box installation

3-6-2 

Secure by using fi eld supplied machine screws (2 pcs.).

Machine screws (field supply) or
(use optional accessory KJB211A)

Switch box
(field supply) or
(use optional accessory 
KJB211A)

Switch box

[Unit : inch (mm)]

3-5/16 (84)

1-13/16

(46)

 

Ɣ

Install the control on a fl at surface only.
To prevent deformation of the lower case, avoid over-tightening the installation screws.

 

Ɣ

NOTE

01_EN_3P243521-7L.indd   8

11/27/2014   11:21:43 AM

Summary of Contents for BRC1E73

















































































Reviews:

No comments