Operation Manual
EDUS721438
18
BRC1E73
3P243520-7N
14
English
Basic Operation
4
On/Off
When
Ɣ
On/Off
button is pressed again,
the system will stop operating and the
Operation lamp will turn off.
Note
To prevent condensation water damage or system failure, do not
Ɣ
shut off the power supply to the indoor unit immediately after
operation. Wait at least fi ve minutes for the condensate pump to
fi nish draining residual water from the indoor unit.
Characteristic of Dry mode
The Dry mode dehumidifi es the space at reduced cooling capacity to
prevent the room temperature from dropping to an uncomfortable
level.
Setback
The Setback function can be used to maintain the space temperature in an assigned range for an
unoccupied period.
Note
When enabled, the Setback mode becomes active when the indoor unit is turned off by either
Ɣ
the user, a schedule event or an off timer.
This function is not available by default. It can be enabled by the system installer.
Ɣ
01_EN_3P243520-7N.indd 14
11/27/2014 10:34:38 AM