EDUS721438
Operation Manual
BRC1E73
9
3P243520-7N
English
5
Operation mode selector button
1.
Press this button to select the operation
Ɣ
mode of your preference.
(See page 10.)
Available modes vary with the indoor unit
*
model.
Fan speed control button
2.
Press this button to select the fan speed of
Ɣ
your preference.
(See page 11.)
Available fan speeds vary with the indoor
*
unit model.
Menu/OK button
3.
Used to enter the main menu.
Ɣ
(See page 20 for the menu items.)
Used to enter the selected item.
Ɣ
Up button
4.
Used to raise the setpoint.
Ɣ
The item above the current selection will be
Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
Ɣ
Down button
5.
Used to lower the setpoint.
Ɣ
The item below the current selection will be
Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
Ɣ
Right button
6.
Used to highlight the next items on the
Ɣ
right-hand side.
Each screen is scrolled in the right-hand
Ɣ
direction.
Left button
7.
Used to highlight the next items on the
Ɣ
left-hand side.
Each screen is scrolled in the left-hand
Ɣ
direction.
On/Off button
8.
Press this button and system will start.
Ɣ
Press this button again to stop the system.
Ɣ
Operation lamp
9.
This lamp illuminates solid green during
Ɣ
normal operation.
This lamp fl ashes if an error occurs.
Ɣ
Cancel button
10.
Used to return to the previous screen.
Ɣ
LCD (with backlight)
11.
The backlight will be illuminated for
Ɣ
approximately 30 seconds by pressing any
button.
If two remote controllers are used to control
Ɣ
a single indoor unit, only the controller
accessed fi rst will have backlight
functionality.
01_EN_3P243520-7N.indd 5
11/27/2014 10:34:35 AM