5 Unit installation
Installation manual
8
FTXP20~3 ATXP20~35N5V1B
Daikin room air conditioner
3P650253-9H – 2022.10
5.2.2
To re-install the front panel
1
Attach the front panel. Align the shafts with the slots and push
them all the way in.
2
Close the front panel slowly; press at both sides and at the
centre.
5.2.3
To remove the front grille
CAUTION
Wear adequate personal protective equipment (protective
gloves, safety glasses,…) when installing, maintaining or
servicing the system.
1
Remove the front panel to remove the air filter.
2
Remove 2 screws (class 20~35) or 3 screws (class 50~71) from
the front grille.
3
Push down the 3 upper hooks marked with a symbol with 3
circles.
a
b
a
a
Upper hook
b
Symbol with 3 circles
4
We recommend opening the flap before removing the front
grille.
5
Place both hands under the centre of the front grille, push it up
and then toward you.
1
2
5.2.4
To re-install the front grille
1
Install the front grille and firmly engage the 3 upper hooks.
2
Install 2 screws back on the front grille.
3
Install the air filter and then mount the front panel.
5.2.5
To remove the electrical wiring box cover
1
Remove the front grille.
2
Remove 1 screw from the electrical wiring box.
3
Open the electrical wiring box cover by pulling the protruding
part on the top of the cover.
4
Unhook the tab on the bottom and remove the electrical wiring
box cover.
a
a
c
b
a
1
3
2
a
Tab
b
Protruding part on the top of the cover
c
Screw
5.2.6
To open the service cover
1
Remove 1 screw from the service cover.
2
Pull out the service cover horizontally away from the unit.
a
b
a
Service cover screw
b
Service cover
5.3
Mounting the indoor unit
5.3.1
To install the mounting plate
1
Install the mounting plate temporarily.
2
Level the mounting plate.
3
Mark the centres of the drilling points on the wall using a tape
measure. Position the end of tape measure at symbol " ".
4
Finish the installation by securing the mounting plate on the wall
using M4×25L screws (field supply).
INFORMATION
The removed pipe port cover can be kept in the mounting
plate pocket.
337
770
A
285
44.5
170
48
48
44.5
116.5
117
337
50
213
237
170
A
d
e
(mm)
a
a
f
h g
a
a
b
a
c
a c
a
d
e
A
A
Mounting plate for class 20~35
a
Recommended mounting plate fixing spots
b
Pocket for the pipe port cover
c
Tabs for placing a spirit level
