Daikin ATXF20C5V1B Operation Manual Download

Page: 12 / 16

8 Troubleshooting

Operation manual

ATXF20~42C5V1B

Daikin room air conditioner

3P520336-10K – 2020.08

Malfunction

Measure

If a safety device such as a fuse, a
breaker or an earth leakage breaker
frequently actuates or the ON/OFF
switch does NOT properly work.

Turn OFF the main power
switch.

If water leaks from the unit.

Stop the operation.

The operation switch does NOT work
well.

Turn OFF the power
supply.

If the user interface display indicates the
unit number, the operation lamp flashes
and the malfunction code appears.

Notify your installer and
report the malfunction
code.

If the system does NOT operate properly except for the above
mentioned cases and none of the above mentioned malfunctions is
evident, investigate the system in accordance with the following
procedures.

INFORMATION

Refer to the reference guide located on

http://

www.daikineurope.com/support-and-manuals/product-
information/

for more troubleshooting tips.

If after checking all above items, it is impossible to fix the problem
yourself, contact your installer and state the symptoms, the complete
model name of the unit (with manufacturing number if possible) and
the installation date (possibly listed on the warranty card).

8.1

Symptoms that are NOT system
malfunctions

The following symptoms are NOT system malfunctions:

8.1.1

Symptom: A sound like water flowing is
heard

▪ This sound is caused by the refrigerant flowing in the unit.

▪ This sound may be generated when water is flowing away from

the unit during cooling or drying operation.

8.1.2

Symptom: A blowing sound is heard

This sound is generated when the direction of the refrigerant flow is
changed (e.g. when switching from cooling to heating).

8.1.3

Symptom: A ticking sound is heard

This sound is generated when the unit slightly expands or contracts
with changes in temperature.

8.1.4

Symptom: A whistling sound is heard

This sound is generated by the refrigerant flowing during defrost
operation.

8.1.5

Symptom: A clicking sound during
operation or idle time is heard

This sound is generated when the refrigerant control valves or
electrical parts operate.

8.1.6

Symptom: A clapping sound is heard

This sound is generated when an external device sucks air out of the
room (e.g. exhaust fan, extractor hood) while the doors and windows
in the room are closed. Open the doors or windows, or turn off the
device.

8.1.7

Symptom: The outdoor fan rotates while
the air conditioner is not in operation

▪

After operation has stopped.

The outdoor fan continues to

rotate for another 30 seconds for system protection.

▪

While the air conditioner is not in operation.

When the outdoor

temperature is very high, the outdoor fan starts to rotate for
system protection.

8.2

Solving problems based on error
codes

Fault diagnosis by user interface

If the unit runs into a problem, you can identify the fault by checking
the error code by the user interface. It is important to understand the
problem and take measures before resetting the error code. This
should be done by a licensed installer or your local dealer.

INFORMATION

See the service manual for:

▪ The complete list of error codes

▪ A more detailed troubleshooting guideline for each

error

To check the error code by the user interface

Aim the user interface at the unit and press

for about

5 seconds.

Result:

blinks in the temperature setting display section.

Aim the user interface at the unit and press