background image

4 Operation

User reference guide

5

EBLQ+EDLQ011~W1 + EK(2)CB
EKMB9W1
Daikin Altherma low temperature monobloc
4P522035-1 – 2018.01

▪ Confirms a selection.
▪ Enters a submenu in the menu structure.
▪ Switches between displaying actual and desired values, or

between  displaying  actual  and  offset  values  (if  applicable)
on the home pages.

▪ Goes  to  the  next  step  (when  you  are  programming  a

schedule in the menu structure).

INFORMATION

If you press 

 or 

 while changing settings, the changes

will NOT be applied.

4.2.2

Status icons

Icon

Description

Space operation mode = Heating.

Space operation mode = Cooling.

Unit is operating.

Desired room temperature = preset value (Comfort;
daytime).

Desired room temperature = preset value (Eco;
nighttime).

▪ On  the  room  temperature  home  page:  Desired

room  temperature  =  according  to  the  selected
schedule.

▪ On  the  DHW  tank  temperature  home  page:

DHW tank mode = Scheduled mode.

DHW tank mode = Reheat mode.

 

DHW tank mode = Sch reheat mode.

Domestic hot water operation.

Actual temperature.

Desired temperature.

At the next scheduled action, the desired temperature
will increase.

At the next scheduled action, the desired temperature
will NOT change.

At the next scheduled action, the desired temperature
will decrease.

The preset value (Comfort or Eco) or scheduled value
is temporarily overruled.

The DHW tank booster mode is active or ready to be
activated.

Quiet mode is active.

Holiday mode is active or ready to be activated.

Button lock mode and/or function lock mode is active.

An external heat source is active. 

Example: 

Gas

burner.

The disinfection mode is active.

A malfunction occurred. Press 

 to display more

information about the malfunction.

Weather-dependent mode is active.

User permission level = Installer.

Defrost/oil return mode is active.

Hot start mode is active.

Emergency operation is active.

4.3

Basic usage

4.3.1

Using home pages

About home pages

You  can  use  the  home  pages  to  read  out  and  change  settings  that
are  meant  for  daily  usage.  What  you  can  see  and  do  on  the  home
pages  is  described  where  applicable.  Depending  on  your  system
layout, the following home pages may be possible:

▪ Room temperature (Room)

▪ Main leaving water temperature (LWT main)

▪ Additional leaving water temperature (LWT add)

▪ DHW tank temperature (Tank)

To go to a home page

1

Press 

.

Result: 

One of the home pages is displayed.

2

Press 

 again to display the next home page (if any).

4.3.2

Using the menu structure

About the menu structure

You  can  use  the  menu  structure  to  read  out  and  configure  settings
that are NOT meant for daily usage. What you can see and do in the
menu  structure  is  described  where  applicable.  For  an  overview  of
the  menu  structure,  see 

"4.9  Menu  structure:  Overview  user

settings" on page 20

.

To go to the menu structure

1

From a home page, press 

.

Result: 

The menu structure is displayed.

1
>
>
>
>

Select

Scroll

Set time/date
Holiday
Quiet mode
Operation mode
Select schedules
Information

Auto

Heating

To navigate in the menu structure

Use 

 and 

.

4.3.3

Turning ON/OFF controls

About turning ON/OFF controls

Before you can control…

You have to turn ON…

Room temperature

Room temperature control
(Room)

Main (+ additional) leaving water
temperature

Main (+ additional) leaving water
temperature control (LWT main
and LWT add)

Main and additional leaving
water temperature control are
always turned ON or OFF
together.

DHW tank temperature

Domestic hot water control
(Tank)

If you turn ON…

Then…

Room temperature control

Main (+ additional) leaving water
temperature control is
automatically turned ON.

Main (+ additional) leaving water
temperature control

Room temperature control is
NOT automatically turned ON.

Summary of Contents for Altherma EBLQ011CAV3





























Reviews: