3 About the system
User reference guide
4
EBLQ+EDLQ011~W1 + EK(2)CB
EKMB9W1
Daikin Altherma low temperature monobloc
4P522035-1 – 2018.01
Example:
Go to [7.4.1.1]:
> User settings > Preset values >
Room temperature > Comfort (heating)
3
About the system
Depending on the system layout, the system can:
▪ Heat up a space
▪ Cool down a space (if a heating/cooling heat pump model is
installed)
▪ Produce domestic hot water (if a DHW tank is installed)
3.1
Components in a typical system
layout
h
a
d
b
c
e
f
g
B
C
A
A
Main zone.
Example:
Living room.
B
Additional zone.
Example:
Bedroom.
C
Technical room.
Example:
Garage.
a
Outdoor unit heat pump
b
Control box EKCB07CAV3
c
Domestic hot water (DHW) tank
d
User interface connected to the control box
e
User interface in the living room, used as room thermostat
f
Underfloor heating
g
Heat pump convectors or fan coil units
h
Option box EK2CB07CAV3
4
Operation
4.1
Overview: Operation
You can operate the system via the user interface. This part
describes how to use the user interface:
Part
Description
At a glance
▪ Buttons
▪ Status icons
Basic usage
Information about:
▪ Home pages, where you can read out
and change settings that are meant for
daily usage
▪ Menu structure, where you can read out
and configure settings that are NOT
meant for daily usage
▪ ON/OFF controls
Space heating/cooling
control
How to control space heating/cooling:
▪ Setting the space operation mode
▪ Controlling the temperature
Domestic hot water
control
How to control domestic hot water:
▪ Reheat mode
▪ Scheduled mode
▪ Sch reheat mode
Part
Description
Advanced usage
Information about:
▪ Quiet mode
▪ Holiday mode
▪ Reading out information
▪ Date, time, units of measurement,
contrast and backlight
▪ User profile and home pages
▪ Locking and unlocking buttons and
functions
Preset values and
schedules
▪ How to use preset values
▪ How to select and program schedules
▪ Overview of predefined schedules
Menu structure
Overview of menu structure
Installer settings table
Overview of installer settings
4.2
The user interface at a glance
4.2.1
Buttons
a
e
f
b
d
c
a
HOME PAGES
▪ Switches between home pages (when you are on a home
page).
▪ Goes to the default home page (when you are in the menu
structure).
b
MALFUNCTION INFORMATION
If a malfunction occurs, is displayed on the home pages.
Press
to display more information about the malfunction.
c
ON/OFF
Turns ON or OFF one of the controls (room temperature,
leaving water temperature, DHW tank temperature).
d
MENU STRUCTURE/BACK
▪ Opens the menu structure (when you are on a home
page).
▪ Goes up a level (when you are navigating through the
menu structure).
▪ Goes back 1 step (example: when you are programming a
schedule in the menu structure).
e
NAVIGATING/CHANGING SETTINGS
▪ Navigates the cursor on the display.
▪ Navigates through the menu structure.
▪ Changes settings.
▪ Selects a mode.
f
OK
