Q-222-040
10
7.5 EMC
Item
Specification
Electrostatic
discharge immunity
test
Contact discharge
±4kV (Charge voltage)
Air discharge
±8kV (Charge voltage)
Performance
standard：B
After test：Within
inherent error
EN61000-6-2
EN61000-4-2
Radiated,
radio-frequency,
electromagnetic
field immunity test
Frequency：① 80 to 1000MHz
Performance
standard：A
During testing：
Within ±20% error
After test：Within
inherent error
EN61000-6-2
EN61000-4-3
② 1.4 to 2.0GHz
③ 2.0 to 2.7GHz
Field strength：① 10V/m
② 3V/m
③ 1V/m
Amplitude modulation：80%AM (1kHz)
Electrical fast
transient / burst
immunity test
Power port
(DC)
±2.0kV
Performance
standard：B
After test：Within
inherent error
EN61000-6-2
EN61000-4-4
Power port
(AC)
±2.0kV
Signal port ±1.0kV
Surge immunity test
Power port
(DC)
Line to ground ±0.5kV
Line to line ±0.5kV
Performance
standard：B
After test：Within
inherent error
EN61000-6-2
EN61000-4-5
Power port
(AC)
Line to ground ±2.0kV
Line to line ±1.0kV
Signal port Line to ground ±1.0kV
Immunity to conducted
disturbances, induced
by radio frequency
fields
Frequency：0.15 to 80MHz
Voltage level：10V, 80%AM (1kHz)
Performance
standard：A
During testing：
Within ±20% error
After test：Within
inherent error
EN61000-6-2
EN61000-4-6
Power frequency
magnetic field
immunity test
Frequency：50/60Hz
Field strength：30A/m
Performance
standard：A
During testing：
Within ±20% error
After test：Within
inherent error
EN61000-6-2
EN61000-4-8
Voltage dips, short
interruptions and
voltage variations
immunity tests (AC
power supply port)
Residual voltage：0%, 1 cycle
Performance
standard：B
After test：Within
inherent error
EN61000-6-2
EN61000-4-11
Residual voltage：40%, 10/12 cycle
Performance
standard：C
After test：Within
inherent error
Residual voltage：70%, 25/30 cycle
Residual voltage：0%, 250/300 cycle
Electromagnetic
radiation disturbance
Frequency band 30 to 230MHz, 10m distance：40dB (μV/m) or less
Frequency band 230 to 1000MHz, 10m distance：47dB (μV/m) or less
EN61000-6-4
EN55011
classA, Group1
Terminal interference
voltage
Power port (AC)：
Frequency band 0.15 to 0.5MHz, Quasi-peak：79dB or less,
Average ：66dB or less
Frequency band 0.5 to 30MHz, Quasi-peak：73dB or less,
Average ：60dB or less
Performance standard A：During and after the test the equipment shall be able to continue operation as
specified.
Performance standard B：The equipment shall be able to continue operation as specified after the test.
However, performance degradation during testing is allowed.
Performance standard C：Temporary loss of function is allowed, but the function can be self-healing or
can be recovered by operation of the control device.
