Daihen OTC RT3500H, Instruction Manual

Page: 35 / 57

－
25
－
4. Coaxial Power Cable for Robot
4.1 Type of Coaxial Power Cables
The coaxial power cable is to lead the wire and shield gas from the wire feeding unit, shock sensor
cable, and voltage detection cable (when DL W.P.S used) to the torch. Refer to the table below to
choose the coaxial power cable according to the manipulator that you use.
Table 4.1 Type of coaxial power cables
Type
Nominal
cable length
Applicable manipulator Remarks
L-10621 1.1 m AII-V6
●
L-10622 1.2 m
●
L-10623 1.3 m AII-V6(For 31
°
torch)
●
L-10624 1.4 m AII-V6L
●
L-10625 1.5 m
●
L-10626 1.6 m AII-V6L(For 31
°
torch) ●
L-10627 1.7 m
△
L-10628 1.8 m
●
L-10629 1.9 m
△
L-10630 2.0 m
△
L-10631 2.1 m
●
L-10635 2.5 m
●
L-10638 0.8 m For AII-B4 exclusive use ●
L-10641 1.2 m For AII-B4L exclusive use ●
L-10648 0.8 m
For AII-B4 DL W.P.S exclusive use
●
L-10651 1.2 m
For AII-B4L DL W.P.S exclusive use
●
●:Standard
,
△
:Build-to-order
Fig.4.1 Outline drawing of the coaxial power cable (For AII-V6/ AII-V6L exclusive use)
Fig.4.2 Outline drawing of the coaxial power cable (For AII-B4/AII-B4L exclusive use)
Fig.4.3 Outline drawing of the coaxial power cable (For AII-B4/AII-B4L DL W.P.S exclusive use)
Nominal cable length
Shock sensor cable
Liner Power cable
Gas hose
Cable cover
Nominal cable length
Power cable
Gas hose
Liner
Shock sensor cable
Gas hose
Voltage detection cable
Liner
Shock sensor cable
Cable cover
Nominal cable length
Power cable