background image

DAIHAN-Sci.com or 

ALL 

for

 

LAB.com

 Shopping Mall

 

DAIHAN Scientific, Digital Rotary Evaporator                                                                                                                21/55 

 

 

A part of this product may be hot during continuous operation of the product, so 
pay attention to the burns, and please wear gloves when handling samples. 

 

Do not use outdoors avoid overheating or electrical faults. The use in the place 
where the sun continuously shines and can get rained on it is prohibited. It may 
cause overheating or electrical fault of the product. 

 

Please do not use flammable or volatile products in the vicinity of the product to 
minimize the risk of firer. Please do not use the flammable spray such as 
lacquers and paint, or volatile, flammable chemicals and its similar product, in 
the proximity of the product. They may cause the ignition due to the spark of 
switch. 

 

Please avoid the disassembly or modification of this product by a non-authorized 
person to avoid serious electrical problems and to retain the warranty service of 
DAIHAN Scientific Co., Ltd. 

 

Please regularly check whether dust or dirt are on the power plug and 
completely connect the plug. If the plug is covered with dust, or the connection 
is not complete, it will cause an electrical shock or fire. 

Please separate the power plug from the outlet for safety when the product is 
unused for long periods of time to avoid overheating or ignition due to dust. 

When disconnecting the power plug, it must be grasped by the hands and then 
pulled. Grasping only the cord and then disconnecting it may cause overheating 
or ignition because of internal lines being disconnected. 

If unusual noise or signs of abnormal behavior are found during use of this 
product, please immediately contact the supplier or DAIHAN Scientific (Co., Ltd.) 
after turning off the power supply and disconnecting the power line. 

When moving the product, please move it so that the power cord and the 
product are not damaged after disconnecting the power plug from the electrical 
outlet, in order to avoid the electrical shock or the ignition due to the damage to 
the cord.. 

Please maintain the clean condition of this product by removing the foreign 
matter while gently wiping with the neutral detergent and a dry cloth after 
checking whether the foreign matter present or not, before and after using this 
product. 

Never insert the explosive or flammable chemicals inside the Bath. There is a 
fire danger. 

When adjusting the bar toward FREE side, since the Main Body is automatically 
moved upward, be careful so that the accident caused by sudden movement is 
not occurred, and please hold the top of the main body with your hand very 
hard and adjust. 

  All  of  the  circuits,  electrical  or  mechanical  parts  and  configurations  used  in  this 

product are the technical assets of DAIHAN Scientific (Co., Ltd.). Only technicians of 
the technical support team at DAIHAN Scientific (Co., Ltd.) or technicians approved 
through  the  education  from  DAIHAN  Scientific  should  be  allowed  to  repair  this 
product.   

Summary of Contents for WEV-1001V




























Reviews: