background image

DAIHAN-Sci.com or 

ALL 

for

 

LAB.com

 Shopping Mall

 

DAIHAN Scientific, Digital Rotary Evaporator                                                                                                                3/55 

1. General                                                                                                                       

1.1 Precautions Before Use 

Thank you for purchasing the Digital Rotary Evaporator.

 

This manual describes the performance and usage instructions of the product, and the 

precautions  in  the  handling.    Please  carefully  read  this  manual,  before  using  the 

product.  The  following  warnings  should  be  strictly  adhered  to:  (The  following  warning 

sign  is  marked  in  the  part  that  is  required  user  attention,  so  please  safely  use  the 

product after being well-acquainted with the meaning.)

                                                                                 

 

Warning   

Failure to follow the instructions may result in injury. 

Caution 

Failure to follow the instructions may result in product failure. 

Proximity Caution 

Keep clear of the product during use. 

 

Notification 

Do  not  disassemble  or  modify  the  product  or  use  it  for  purpose  other  than  its 

intended function. 

 

Caution: High Temperature 

High-temperature heating, pose a risk of burns. 

 

Danger of Explosion 

If volatile, explosive chemicals are used, there is a danger of explosion.   

 

This symbol indicates Protective earth (ground). 

 

This symbol indicates power “OFF” on the power on/off switch. 

 

This symbol indicates power “ON” on the power on/off switch. 

 

This  symbol  indicates  the  connection  point  of  the  neutral  conductor  on  the 

installed unit. 

 

This symbol indicates alternating current Voltage. 

Summary of Contents for WEV-1001V




























Reviews: