DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Smart-Lab Temp./ Humidity Chamber 21/66
Installation Method of
Water Tank before using the Product
-
When the installation of the Water Tank in the product is completed, turn the Main Power
Switch to On, after checking whether there is leak or not.
-
When the power of the product is turned on, water is flowed into the humidification bath
and filled with water, the Water Level Indicate Lamp will be flashed.
-
Always be careful so that the Water Tank is not emptied while the product is operating.
①
Check Water Tank, Silicon Tube and Lux
Meter among the components of the product.
②
Check the position of the Water Tank Shelf in
the back of the product.
③
Firmly fix the Valve on the Water Tank.
④
A Tap is on the Water Tank, so turn the Valve
to the Tap by your hand.
⑤
Lock the Valve secured to the Water Tank by
turning to the right, and open the lid of the
Water Tank and fill with water into the Water
Tank.
(If turn right the Valve : Valve Closes, If turn
left the Valve : Valve Opens)
⑥
Position the Water Tank on the Water Tank
Shelf.
⑦
Insert the Tube into the Valve. Be careful so
that the Tube does not tear during inserting.
⑧
Insert the Tube into the Water Feed.
⑨
Open the lid of the Water Tank, and turn the
Valve to the Open position.
