Daihan Scientific MaXtable H20 User Manual Download Page 4

DAIHAN-Sci.com or 

ALL

for

LAB.com

Shopping Mall

DAIHAN Scientific, High Performance Dry Bath Heating Block "MaXtable

TM

H20"                                                   

4/22

I

N

Be  careful  for  electrical  shock.  The  inappropriate  power  connection  induces  the 
damage of product or the injury of the human body.

This symbol indicates Protective earth (ground).

This symbol indicates power “OFF” on the power on/off switch.

This symbol indicates power “ON” on the power on/off switch.

This symbol indicates the connection point of the neutral conductor on the installed 
unit.

This symbol indicates alternating current Voltage.

1. General                                                                                                                       

      1.2 Product introduction

The Dry Block is compact and based on the ergonomic design to be conveniently applicable to 
narrow  spaces.  The  digital  control  employed  therein  can  realize  uniform  reproducibility  over 
entire  interval  of broad  range of temperature. The  product thus  can  be  applicable to  various 
labs in diverse disciplines and has the following features.

1. The Digital Feedback Control, controlled by the embedded microprocessor, enables users to 

have precision control and keep an accurate temperature. 

2. The high-quality insulation used in the product can prevent overheating and will keep the 

surface temperature of the main unit to a minimal level. 

3. The  high-performance  heater  integrated  into  the  product  was  designed  to  minimize 

defective rates through effective thermal conductivity. 

4. The  aluminum  Block  with  excellent  thermal  conductivity  reduces  the  heating  time,  and 

provides effective temperature distribution.

5. The wide display was furnished for the product to enable users a convenient checking on 

current range of set values for the operation of the product. 

6. The touch buttons were made by an excellent design focused on the convenience of users 

and maintenance thereof. 

Summary of Contents for MaXtable H20























Reviews: